Hi, I from Brazil and I bought Winca S160 ford Ford Ecosport,
I have one problem, the light buttons (backlight) on the panel no power on.
The lamp check button in the settings is on.
Can any help?
Hi! In my settings there are 3 options to toggle highlighting. One of them actually turns off. Have you tried all the options?
Hi, thanks for your return, Yes, I tried the three options, and neither option works.
Buttons work normally, only the damn button backlight does not turn on.
Have some idea?
They have not worked since the purchase? You may contact the seller, is very similar to marriage. Tried to update the firmware? Also I can advise to apply on the roadnav forum
I already checked the forum, not for the S160 M566.
The vendors do not know what it is, and they think the installation is wrong, but I've already been in four installers and have nothing to do, it's all plug and play.
what is your model?
My model is M566 - Ford KA ( Brazil )
Any help?
This is original firmware from roadnav.com.cn
Do you have any idea? Any help for solved my problem?
https://mega.nz/#!k11nXbaC!10BO0FhVP3o6RF8DlVeHp6fHCZK3KJkCbhNOQb-wd8w
Can you try to help me?
Провод подсветки не подключен. На Lamp detection не приходит +12 от Can адаптера. Поэтому и не работает
I read your comment via google translate. I've noticed that it's a general problem with all vehicles that installed this plant. The manufacturer of s160 will do new reads on redecan and will send a software update and canbus for correction.
Thanks all
Есть же 100 % решение вашего вопроса - подключить на 4 пин (согласно штатной распиновки lamp detection провод подсветки обозначен как номер 4. распиновка (pinout) магнитолы наклеена на самой магнитоле) от альтернативного источника питания , при включении габаритов (подсветки)
I already tried to connect 12V on pin 4. The control panel dims the light but as the keyboard is original, it does not light as it comes straight from the redecan of the vehicle. There is still no solution here in Brazil, except to open the panel and make a connection, but for this I need the electrical schematic of the panel, buttons and so on. It's the same panel as the Fiesta and Ecosport 2013 onwards
See my topic in forum roadnav.com
https://www.roadnav.com/forum/help-aa/80086-ford-ka-brazil-backlight-problem-with-plataform-s160